Getting Started
Install the appSetup your bandTroubleshooting
Connect the bandData quality issuesThe band turns offBand dead after updateUsing Pylot
Understanding Flow & FatigueOptimal time & lengthLive recommendationDaily summaryTrendsTagsFirmware UpdatePoor data qualitySetup your band
Charge, position, tighten, good to go
Charge your headband
Charge your headband with a USB-C cable for 60-90 minutes before use.
_(1)/w=3840,quality=90,fit=scale-down)
When fully charged, the LED will turn solid white.
/w=3840,quality=90,fit=scale-down)
When fully charged, the battery life of your headband will be over 10 hours.
Positioning your band
Position the headband so the HRV sensor is in the center of your forehead and the single EEG sensor is to the left. Wear the headband 1-2cm above your eyebrows. Ensure there is no hair between the sensors and your skin.
/w=3840,quality=90,fit=scale-down)
Tighten the headband so that it is comfortably firm. If it is uncomfortable, loosen the strap.
About your band
The Pylot headband has a single-channel EEG and HRV sensor. Your headband will automatically turn off if it is not worn for 15 minutes.